Temperature Control Siemens RAA41
(Code 01.10.177)
Frequency |
50/60 Hz |
Ambient temperature, operation |
0…50 °C |
Setpoint setting range |
8…30 °C |
Switching differential |
≤1 K |
Switching voltage |
AC 24…250 V |
Switching current |
0.2…6 (2) A |
Type of fixing |
Wall mouting with screws |
Degree of protection |
IP30 |
Size(W x H x D) |
98 x 97 x 35.3 mm |
Temperature Control Siemens RDD100.1
(Code 01.10.187)
Positioning signal |
2-position |
Ambient temperature, operation |
0...50 °C |
Setpoint setting range |
5...35 °C |
Switching differential |
1 K |
Relay outputs |
Change-over contact, potential-free |
Relay output, switching voltage |
AC 24...230 V |
Relay output, switching current |
5 (2) A |
Type of fixing |
Wall mounting with screw |
Degree of protection |
IP30 |
Temperature Control Siemens RDG110
(Code 01.10.219)
Operating voltage |
AC 230 V |
Frequency |
50/60 Hz |
Power consumption |
11 VA / 2 W |
Positioning signal |
2-position |
Control algorithm |
2-point |
Ambient temperature, operation |
0...50 °C |
Setpoint setting range |
5…40 °C |
Measuring range, temperature |
0…49 °C |
Switching differential |
Heating: 0.5…6 K |
Analog inputs |
External room / return air temperature, Heat / Cool changeover, Operation mode changeover, Window contact on/off, Dewpoint monitor, Electrical heater enabled |
Analog inputs, number |
2 |
Analog input, signal |
NTC 3k , Switch |
Digital inputs, number |
1 |
Relay outputs |
Valve, compressor or el. heater: 2 outputs (SPDT), 2-position, Fan: 1- or 3-speed |
Relay outputs, number |
5 |
Relay output, switching voltage |
AC 230 V |
Relay output, switching current |
Valve, compressor or el. heater: 5 (3), Fan: 5 (4) A |
Mounting position |
Wall mounting |
Mounting |
Wall mounting with screws |
Type of fixing |
Wall mounting with screws |
Degree of protection |
IP30 |
Size (W x H x D) |
93 x 128 x 30.8 mm |