FRANKLIN 4

FRANKLIN 4" Super Stainless 1 ~ 3-wire

  • Hermetically sealed stator. Anti track, self healing stator resin prevents motor burn out
  • High efficiency electrical design (low operation cost, cooler winding temperature)
  • Removable „Water Bloc“ lead connector 
  • Cable material according to drinking water regulations (KTW approved)
  • Water lubricated radial and thrust bearings
  • All motors prefilled and 100% tested
  • Non contaminating, water-filled design
  • For use with Franklin Electric control box
  • Offer highest starting torque of all single phase
  • motors
Technical Specification - Standard Motor
  • 4" NEMA flange
  • Rotation: CCW facing shaft end
  • Degree of protection: IP68
  • Insulation: Cl. B
  • Rated Ambient temp.: 30°C
  • Cooling flow: Motors 2,2 kW and larger: min 8 cm/sec
  • Starts/h: 20
  • Mounting: vertical/horizontal
  • Voltage tolerance: +6% / -10% UN
  • Motor protection: included Franklin Electric Control Boxes

Franklin Rewindable Motors 6'', 8'', 10''

Franklin Rewindable Motors 6'', 8'', 10''

  • Easy to assemble with double flange
  • Cable material according to drinking water regulations (VDE / ACS / KTW approved)
  • Sand fighter® SiC seal system for high performance in sand
  • High efficiency electrical design for low operation cost
  • All motors prefilled and 100% tested
  • Max. storage temperature -15 °C - + 60 °C
  • Design for retrofitable PT100 sensor
  • Non-contaminating FES 93 filled design

Technical Specification:

  • 30,0 - 93,0 kW
  • 8-inch NEMA flange
  • Protection: IP 68
  • Starts per hour: max. 10
  • Installation position: vertical / horizontal (93 kW motors may not be installed horizontally)
  • Motor Lead in 6 m length (KTW approved)
  • Standard Voltage: 380-415 V/50 Hz, 460 V/60 Hz
  • Voltage tolerance 50 Hz: -10% / +6% UN [380-415 V = (380-10%) – (415+6%)]
  • Voltage tolerance 60 Hz: ±10% UN
  • Motor protection: Select thermal overloads according to EN 61947-4-1
  • Standard motor with PVC winding insulation
  • For max. ambient temp. of 30 ºC with a min.cooling flow:
  • 30 kW - 52 kW v = 0,2 m/s
  • 55 kW - 93 kW v = 0,5 m/s
Franklin Encapsulated Motors 6

Franklin Encapsulated Motors 6"

  • Hermetically sealed stator, Anti track, self healing stator resin prevents motor burn out
  • Removable “Water Bloc“ lead connector
  • Cable material according to drinking water regulations (KTW approved)
  • Sand slinger and shaft seal for high performance in sand
  • High efficiency electrical design for low operation cost
  • All motors prefilled and 100% tested. Max. storage temperature -15°C - +60°C
  • Non contaminating, water-filled design

Technical Specification - Standard Motor

  • 4.....45 kW
  • 6" NEMA flange • Protection: IP 68
  • Sand fighter®“ Motor with SiC - Mechanical Seal
  • Starts per hour: max. 20
  • Installation position: vertical / horizontal
  • Standard voltage: 380-415V/50Hz, Voltage tolerance: +6% / -10% (Standard: 415 + 6% = 440V, 380 – 10% = 342V)
  • Motor protection: Select thermal overloads according to EN 60947-4-1, trip class 10 or 10A, trip time < 10 s. at 5 x IN
  • Insulation: Class F
  • Rated ambient temperature: 4-30kW bis 30°C; 37-45kW bis 50°C
  • Cooling flow: min. 16 cm/sec