The wide range of Lowara 4” to 12” submersible borehole motors offers advanced solutions to provide water in all conditions without wasting money: high efficiency and long lasting design are the key values of both the canned and the rewindable versions.

SPECIFICATIONS

The wide range of Lowara 4” to 12” submersible borehole motors offers advanced solutions to provide water in all conditions without wasting money: high efficiency and long lasting design are the key values of both the canned and the rewindable versions.

 

SPECIFICATIONS

The wide range of Lowara 4” to 12” submersible borehole motors offers advanced solutions to provide water in all conditions without wasting money: high efficiency and long lasting design are the key values of both the canned and the rewindable versions.

 

SPECIFICATIONS

The e-GS series is a robust 4” pump designed for long life. It’s built mainly in stainless steel, has casted discharge and a special floating impeller design to enhance the wear resistance and to maintain the performance over time.

The e-GS series is designed specially to be used in 4” wells and its ideal for use in irrigation systems, pressure boosting, geothermal systems and fountain applications.

All e-GS pumps can be coupled to 4” NEMA standard motors.

 

SPECIFICATIONS

• Delivery: up to 22 m³/h
• Head: up to 310 m
• Power supply: both single and three-phase 50 and 60 Hz
• Power: from 0.25 kW up to 7.50 kW
• Temperature of pumped liquid: to 35°C
• Maximum immersion depth: 300 m

The Z6-ZN6 Series is designed for use in 6” wells. The head and motor support of this lightweight and sturdy pump is cast in stainless steel as are the shaft sleeves ensuring long lasting reliability and efficiency.

The pump has a high sand handling capability which make the Z6-ZN6 series suitable for use in aggressive environments such as water supply from deep wells or irrigation over large areas such as golf courses.

Z6: AISI 304
ZN6: AISI 316

All Z6-ZN6 pumps can be coupled to NEMA standard motors.

 

SPECIFICATIONS

• Delivery: up to 78 m³/h
• Head: up to 700 m
• Power supply: three-phase 50 Hz
• Power: from 0.55 kW up to 55 kW
• Maximum operating pressure: 70 bar
• Temperature of pumped liquid: to 60 °C
• Maximum immersion depth: 350 m

The Z8-ZR8 series is designed for use in 8” wells. The pump is built in stainless steel and resists corrosion even in more aggressive environments thanks to the ZR8 version in Duplex.

This design feature boasts a “dynamic” wear ring which reduces hydraulic losses to a minimum and prevents the pump from blocking during stand-by periods. Meaning the pump is ideal for use in mining, water supply from deep wells and pressure boosting and water distribution applications in municipal and industrial systems.

Z8: AISI 304
ZR8: DUPLEX

All Z8, ZR8 pumps can be coupled to NEMA standard motors.

 

SPECIFICATIONS

The Z-ZR10-Z-ZR12 Series is a multistage vertical centrifugal pump designed for use in 10” and 12” wells. The range is designed to give high efficiency throughout its performance area and almost every duty point between 120 m3/h and 460 m3/h has an efficiency higher than 80%. The shaft alignment of the pump is specifically designed to reduce vibration issues throughout the lifetime of the pump.  The wear ring on the Z10/ZR10 pump also keeps recirculation losses to a minimum, ensuring high levels of efficiency in applications such as supply of surge tanks and reservoirs, fire fighting and agricultural flood irrigation.

Z10-Z12: AISI 304
ZR10-ZR12: DUPLEX

All Z-ZR10-Z-ZR12 pumps can be coupled to NEMA standard motors.

 

SPECIFICATIONS

• Delivery: up to 520 m³/h
• Head: up to 545 m
• Power supply: three-phase 50 Hz
• Power: from 4 kW up to 350 kW
• Temperature of pumped liquid: to 60 °C
• Maximum immersion depth: 350 m

The Scuba series is a 5” close-coupled submersible pump. The pump has an integrated electric motor which is cooled by pumped liquid. The double mechanical face seals and the technopolymer impellers ensure superior performances and maximum operational efficiency.  The single phase version has an internal capacitor and built-in thermal protection meaning the pump does not require a connection to a control panel for starting. This design makes the submersible pump the ideal choice for primary water supply in tanks or reservoirs, sprinkler irrigation systems and pressure boosting as it can be installed directly inside tanks or wells to avoid suction problems.

 

SPECIFICATIONS

• Delivery: up to 7.50 m³/h
• Head: up to 80 m
• Power supply: both single and three-phase 50 and 60 Hz
• Power: from 0.55 kW up to 1.10 kW
• Temperature of pumped liquid: to 40 °C
• Maximum immersion depth: 20 m
• Free passage: up to 2.5 mm