Applications

Submersible cast iron pump with triturator suitable for lifting or drainage installations for civil and industrial sewage. Thanks to the grinding system, the material present in the sewage (organic waste, fabric, rubber, etc.) is reduced into small particles, allowing the liquid to be pumped without any risk of clogging or obstruction of the delivery pipes.

 

Constructional features of the pump

Cast iron pump body, motor casing and suction cover.

High-resistance cast iron thrust ring pipe impeller.

Triturator device obtained by precision casting of extremely strong and durable materials.

Stainless steel rotor shaft, handle and screws.

Inspectable oil seal chamber.

Silicon carbide mechanical seal.

The supply vent of 2” threaded GAS is radial to facilitate assembly on the lifting devices (DSD 2).

Applications

Submersible cast iron pump with vortex backflowing impeller for cesspools. Suitable for lifting or drainageinstallations for sewage from cesspools and for generally dirty water containing solids (see technicalparticulars). Also suitable for ground water, rain water, clean and dirty waste water, river or lake water.

 

Constructional features of the pump

Cast iron pump body, motor casing, suction cover and impeller.

Stainless steel rotor and screws.

Double mechanical seal with inspectable oil seal chamber. 

 

Applications

The submersible pump from the NOVA series is designed mainly for automatically operated fixed applications in domestic use, draining basements and garages which are subject to flooding. Thanks to its compact, easy to handle form, it may also be used as a portable pump for emergencies such as lifting water from tanks or rivers, emptying swimming pools, fountains, excavations and underpasses. It

is also ideal for gardening and hobbies in general. The submersible pump from the FEKA series has been designed for lifting sewage from cesspools and is capable of draining suspended solids with dimensions up to 25 mm. The level switch allows fixed installation and guarantees automatic pump operation. Available also with special stainless steel motor shaft version (SV).

 

Constructional features of the pump

Water-resistant technopolymer pump body, impeller, top body and suction grid.

Stainless steel motor, rotor shaft and screws.

Triple O-ring seals interposed with oil chamber.

APPLICATIONS

The vertical delivery draining submersible pump is suitable for domestic automatically operated fixed applications, for draining basements and garages that are subject to flooding. Thanks to its compact and easy to handle shape, and the built-in float, it is suitable for particularly small draining wells (minimum 20x20 cm). It may also be used as a portable pump for emergencies such as lifting water from tanks or rivers, emptying swimming pools, fountains, excavations and underpasses. It is also ideal for gardening, and hobby applications in general. This pump can be used with liquids containing solid particles of up to 5 mm in size. The level switch with built-in float allows fixed installation, ensuring automatic operation. With easy access to the float for maintenance purposes, and automatic or manual mode selector. Minimum suction level up to 2/3 mm.

Applications

Suitable for use during the winter period above the pool covers, to remove rainwater and avoid damage to the cover due to the excessive weight of the accumulated water. If necessary, suitable for emptying the swimming pool before the winter period or in general as a submersible emptying and draining pump or as a portable pump in the event of an emergency.

 

Constructional Characteristics

Applications

Stainless steel submersible pump with thrust ring type impeller, for draining clear waste water containing solids of maximum

10 mm diameter.

Pump construction characteristics

Pump body, impeller, flange, filter and disk, motor casing, casing with handle and cabling compartment cover in stainless steel AISI 304. Stainless steel handle covered with insulating rubber. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed non-toxic oil chamber, in carbon-aluminium motor side and silicon carbide- silicon carbide pump side

Applications

Submersible cast iron pump for use on building sites with thrust ring pipe impeller, designed for draining, lifting or transfer or sandy, muddy or sludgy water, ground water, rain water, fountain water, clean waste water, river or lake water containing solid bodies with maximum dimensions 12 mm.

 

Constructional features of the pump

Cast iron pump body and motor casing.

High-resistance cast iron thrust ring pipe impeller.

Cast iron suction cover covered with abrasion-proof rubber.

Stainless steel rotor shaft, handle, filter, filter cover and screws.

Inspectable oil seal chamber.

Silicon carbide mechanical seal.

The supply vent of 2” threaded GAS is radial to facilitate assembly on the lifting devices (DSD 2). 

APPLICATIONS

Powerful submersible pumps for draining and emptying applications. Suitable for pumping dirty water with solid particle size up to 38 mm. Automatic version with float switch for automatic pump start and stop also available

 

CONSTRUCTION FEATURES OF THE PUMP

Hydro resistant technopolymer pump body, wear-free impellers, cover, and suction grid.

Corrosion and oxidation resistant materials.