SELF PRIMING SIDE-CHANNEL ELECTRIC PUMPS FOR TRANSFERS OF LIQUIDS IN BRASS WITH SINGLE-PHASE MOTOR - NORMAL SERIES 

 

The best solution for transfers of liquids because of the high self-priming capability, the possibility to operate with discontinuous presence of the liquid at the suction and the reversibility of the flow. The particular tight structure of the pump body avoids the contact between the liquid and the motor and prevents losses.
They are used for home uses, gardening, agriculture, etc.

 

SPECIFICATIONS

-Height of priming 6 meters

-Possibility to reverse the flow

-Asyncronous single-phase motor, protection IP 44, with switchreverser

-Continuous Duty

-Pumps are supplied with one straight fitting and one curved fitting.

 

SPECIFICATIONS ABOUT THE LIQUID

-Max temperature 90° C

-Max density 1.1 g/cm3

-Without hard particles (e. g. sand)

-Not too viscous

-Examples: water, sea water, gasoil, oil, anticryptogamics, etc.

 

MATERIALS

-Pump body: Brass CB754S
-Impeller: Brass CB754S
-Shaft: stainless steel AISI 316
-Counterflange (EEM 20): stainless steel AISI 304

SELF PRIMING SIDE-CHANNEL ELECTRIC PUMPS FOR TRANSFERS OF LIQUIDS IN BRASS WITH SINGLE-PHASE/THREE-PHASE MOTOR - PROFESSIONAL SERIES

 

The best solution for transfers of liquids because of the high self-priming capability, the possibility to operate with discontinuous presence of the liquid at the suction and the reversibility of the flow. The particular tight structure of the pump body avoids the contact between the liquid and the motor and prevents losses. Series ENM and ENT are used for professionale uses or hard applications. On request they can be equipped with a manual by-pass to regulate capacity and head. They are used in agriculture, nautical field, industry, etc.

 

SPECIFICATIONS 
- Height of priming 6 meters
- Possibility to reverse the flow
- Asyncronous single-phase (ENM) or three-phase (ENT) motor, protection IP 44, with professional switchreverser (see drawing) and cable
- Continuous duty 
- Pumps are supplied with one straight fitting and one curved fitting. 

 

SPECIFICATIONS  ABOUT THE LIQUID 
- Max temperature 90° C (130° C with gaskets in Viton)
- Max density 1.1 g/cm3
- Without hard particles (e. g. sand) 
- Not too viscous
- Examples: water, sea water, gasoil, oil, anticryptogamics, etc. 
- Do not use with petrol, solvents and, in general, in places presenting the risk of explosion and fire.                     

 

 

SELF PRIMING SIDE-CHANNEL ELECTRIC PUMPS FOR TRANSFERS OF LIQUIDS IN BRASS WITH DIRECT CURRENT MOTOR 

 

This series of direct current self-priming electric pumps solves the problem of liquid transfers when a battery is available as power supply. They have a very strong suction capability and they can operate also with discontinuous presence of the liquid at the suction. The particular tight structure of the pump body avoids the contact between the liquid and the motor and prevents losses. On request they can be equipped with a manual by-pass to regulate capacity and head. They are used in the nautical field, on tank trucks, in agriculture, etc.

 

SPECIFICATIONS 
- Height of priming 6 meters 
- Direct current motor 12 or 24 Volts with terminal board, protection IP 23 
- Continuous duty 
- Pumps are supplied with one straight fitting and one curved fitting.

 

SPECIFICATIONS ABOUT THE LIQUID 
- Max temperature 90° C (130° C with gaskets in Viton) 
- Max density 1.1 g/cm3 
- Without hard particles (e. g. sand) 
- Not too viscous 
- Examples: water, sea water, gasoil, oil, anticryptogamics, etc. 
- Do not use with petrol, solvents and, in general, in places presenting the risk of explosion and fire.                      

SELF PRIMING SIDE-CHANNEL ELECTRIC PUMPS FOR TRANSFERS OF LIQUIDS IN STAINLESS STEEL AISI 316 WITH SINGLE-PHASE OR THREE.PHASE MOTOR 

 

The best solution for transfers of liquids because of the high self-priming capability, the possibility to operate with discontinuous presence of the liquid at the suction and the reversibility of the flow. The AL series, entirely made of stainless steel AISI 316, is particularly suited for corrosive liquids (chemical agents, fertilizing fluids, sea water) and food fluids (milk, wine, oil, fruit juices). On request they can be equipped with a manual by-pass to regulate capacity and head. They are used in oenology, food and chemical industry, agriculture. 

 

SPECIFICATIONS
- Height of priming 6 meters 
- Possibility to reverse the flow 
- Pump body, impeller and shaft in stainless steel AISI 316 
- Asyncronous single-phase (ALM) or three-phase (ALT) motor, protection IP 44, with professional rotary switchreverser and cable 
- Continuous duty 

 

SPECIFICATIONS ABOUT LIQUID
- Max temperature 90° C (130° C with gaskets in Viton) 
- Max density 1.1 g/cm3 
- Without hard particles (e. g. sand) 
- Not too viscous 
- Do not use with petrol, solvents and, in general, in places presenting the risk of explosion and fire. 

SELF PRIMING SIDE-CHANNEL ELECTRIC PUMPS FOR TRANSFERS OF LIQUIDS IN STAINLESS STEEL AISI 316 WITH DIRECT CURRENT MOTOR

 

The best solution for transfers of liquids because of the high self-priming capability and the possibility to operate with discontinuous presence of the liquid at the suction. The AL series, entirely made of stainless steel AISI 316, is particularly suited for corrosive liquids (sea water, chemical agents, fertilizing fluids) and food fluids (milk, wine, oil, fruit juices). This version with direct current motor (12 or 24 Volts) is used when a battery is available as power supply. On request they can be equipped with a manual by-pass to regulate capacity and head. Fields of use: nautical field, tank trucks, agriculture, etc.

 

SPECIFICATIONS
- Height of priming 6 meters 
- Possibility to operate with discontinuous presence of the liquid at the suction 
- Pump body, impeller and shaft in stainless steel AISI 316 
- Direct current motor 12 or 24 Volts with terminal board, protection IP 23 
- Continuous duty

 

SPECIFICATIONS ABOUT LIQUID
- Max temperature 90° C (130° C with gaskets in Viton) 
- Max density 1.1 g/cm3 
- Without hard particles (e. g. sand) 
- Not too viscous 
- Do not use with petrol, solvents and, in general, in places presenting the risk of explosion and fire.

SELF PRIMING ELECTRIC PUMPS TYPE JET IN STAINLESS STEEL AISI 304 
FOR WINE FILTERS AND BOOSTER UNITS, WITH SINGLE-PHASE OR THREE-PHASE MOTOR

            

APPLICATIONS
- Wine filters
- Booster units
- Washing
- Irrigation of gardens and kitchen gardens
- Feeding of fountains
- Suction and transfer of drinkable water and, generally, of clean water from tanks, wells, canals, also if some air is dissolved in the liquid

 

SPECIFICATIONS
-Pump self-priming until 8 meters of depth 
- Max temperature of the liquid 60° C 
- Max operating pressure: 6 bar 
- Series JIM: single-phase, with capacitor case and terminal board 
- Series JIM GARDEN: single-phase, with switch, cable (2 m) with plug and handle 
- Series JIT: three-phase, with terminal board and cover  

SELF PRIMING SIDE-CHANNEL PUMPS FOR TRANSFERS OF LIQUIDS IN STAINLESS STEEL 

AISI 316 WITH BEARING AND PULLEY             

 

The best solution for transfers of liquids because of the high self-priming capability, the possibility to operate with discontinuous presence of the liquid at the suction and the reversibility of the flow. The AL series, entirely made of stainless steel AISI 316, is particularly suited for corrosive liquids (chemical agents, fertilizing fluids, sea water) and food fluids (milk, wine, oil, fruit juices). This version with bearing and pulley allows an easy coupling to any motor. On request they can be equipped with a manual by-pass to regulate capacity and head. They are used in the nautical field,as components for agricultural machines, in agriculture, industry, etc.

 

SPECIFICATIONS
- Height of priming 6 meters 
- Possibility to reverse the flow 
- Pulley type 1A72 (models 20-25) or 2A72 (models 40-50)                      

 

SPECIFICATIONS ABOUT THE LIQUID
- Max temperature 90° C (130° C with gaskets in Viton) 
- Without hard particles (e. g. sand) 
Examples: chemical fertilizing fluids, anticryptogamic fluids, chemical agents, sea water, wine, oil, fruit juices, milk, etc. 

SELF PRIMING SIDE-CHANNEL PUMPS FOR TRANSFERS OF LIQUIDS IN BRASS WITH BEARING AND PULLEY 

 

The best solution for transfers of liquids because of the high self-priming capability, the possibility to operate with discontinuous presence of the liquid at the suction and the reversibility of the flow. The particular tight structure of the pump body avoids the contact between the liquid and the motor and prevents losses. This version with bearing and pulley allows an easy coupling to any motor. On request they can be equipped with a manual by-pass to regulate capacity and head. They are used in the nautical field,as components for agricultural machines, in agriculture, industry, etc. 
                 

SPECIFICATIONS
- Height of priming 6 meters 
- Possibility to reverse the flow 
- Pulley type 1A72 (models 20-25-30-35) or 2A72 (models 40-50) 
- Pumps are supplied with one straight fitting and one curved fitting. 

 

SPECIFICATIONS ABOUT THE LIQUID 
- Max temperature 90° C (130° C with gaskets in Viton) 
- Without hard particles (e. g. sand) 
- Examples: water, sea water, gasoil, oil, anticryptogamics, etc